One of the most common problems of the iPad is the red screen of death. When the issue of iPad red screen occurs, people are alarmed by this color and they have no idea about what to do to fix this matter. Want to know the methods to fix the red warning color on the iPad? This blog is just what you need.
The first way is to hard reset your iPad. If your iPad with a red screen can be turned off, though this is not very likely, you should do so. And if not, a hard rest will do. A hard reset, also called a hard reboot, may and may not eliminate the ultimate origin of what cause the iPad red screen, but it can definitely serve as an expedient solution, which at least allows your iPad to function for a certain period of time.
To force an iPad to restart, hold the Home button and Power button, which are pointed out in the picture below, at the time until the Apple logo appears on the screen.
The second fix is the most useful and efficient one to work out an iPad red screen. When the red screen is probably caused by software glitches or corrupted software according to your deduction, your first reaction might be spending time and effort on finding the problematic software. However, there is an efficient tool to save you from all the errands, including trying various methods provided on the Internet. The tool is TunesKit iOS System Recovery.
It is an iOS system recovery tool that covers more than 30 iOS problems, iPad red seen included. The most outstanding feature of this software is that its recovery will not damage your precious personal data. Don't worry even if you are not confident with your ability to use a computer, because it only takes three simple steps to repair your iPad.
Step 1: Launch TunesKit iOS System Recovery and connect your iPad to the computer with Apple USB cable (to ensure stable connection). Click the Start button after your iPad has entered the Recovery Mode. Then in the mode selection window, choose the Standard Mode, because the Standard Model can perfectly solve your problem without erasing the personal data.
Step 2: In the window shown below, you need to confirm the displaying device info and correct it if anything is wrong. Then press the Download button at the lower right corner to download the repairing firmware matching your device. It is necessary to make sure there is enough space in the target download folder, otherwise, the firmware download will naturally fail.
Step 3: Once the firmware is downloaded, click on the Repair button and wait until the repairing process finishes. Note that a stable connection must be maintained during the process in case your iPad gets bricked.
Finally, if unfortunately above two methods don't work, you can try to ask Apple official support to resolve it. This is solution suits those red screen errors caused by hardware issues. For example, if you see the red screen on the iPad after it was dropped on the floor, then the hardware damage is very likely the culprit. Sometimes, hardware damages may not result from obvious physical damages, and bad using habits, such as using an iPad while it is being charged, will lead to hardware damages.
All in all, for hardware issues, the best solution is to go to the nearby Apple outlets to have the damaged parts repaired or replaced. It's even better if you have a warranty, which can reduce your repairing fee.
In addition, for those who have software or iOS issues and the previous 2 solutions fail to work, Apple's official assistance is recommended as the final method. It is not recommended to iTunes restore the iPad on your own, because that will make you lose all the data. Leaving the decision to the professional technician is a safer choice.
In conclusion, when we meet with the iPad red screen of death issue, don't be fretted! These three ways can be used to easily let you get out of the trouble. Just give it a shot.
No comments:
Post a Comment