Did you experience or are you encountering the problem of iPad volume button stuck? Well, that's why you are reading this article, which I can make sure that you won't be disappointed? Now let's get to the point. Actually, when the iPad gets volume button stuck, you must feel irritated as this circumstance could be one of the worst ones that iPad users face. But don't worry, to fix this issue is what we are going to talk about next, and you can try out the following 7 simple yet effective methods.
1. Press it for a few times
If your iPad has no hardware damage, for example, being dropped or water damaged, then the situation can be that the iPad may be just temporarily landed into the volume button stuck. In this case, what you can do firstly is to put some pressure on the iPad volume buttons. Namely, constantly press and hold the volume up or the volume down button until the volume icon appears on the iPad home screen, finally check out whether the volume button is still stuck on the iPad.2. Clean the volume button
At most times, the iPad volume button stuck can be attributed to the dust and debris accumulated in the groove. If it is the case, you need to carefully clean the volume button. To do that, make a cotton and some water prepared, drip several drops of water on the cotton, then gently wipe it, finally use a dry cloth to tub it again.3. Force restart iPad
If the above ways fail to do the trick, then this matter could result from software errors or MacOS system glitches. In this way, you can solve iPad volume button stuck by force restarting the device. The specific steps of rebooting iPad are presented below.For iPad with Home button users, press the Home and Power buttons down at the same time until the Apple logo is shown on the interface.
For other iPad versions customers, swiftly hold and release volume up and down buttons respectively, then keep the top button until the Apple logo appears on the screen.
4. Update the iPadOS system
Besides, updating the iPad to the latest iOS system may be helpful in dealing with the iPad volume button stuck issue. Please give it a shot with the procedures below.Step 1: Tap on the General option in Settings of your iPad.
Step 2: Hit on Software Update and Download & Install buttons.
Step 3: Affirm the request.
5. Reset all settings
Moreover, resetting iPad's all settings is also worth trying to resolve the problem here. However, this solution, though effective sometimes, will bring the device back to the factory settings which erases all of the data and files on the device.Step 1: Head to Settings > General > Reset of iPad.
Step 2: Enter your apple ID and according passcode.
Step 3: Click on the Reset All Settings option.
6. Use a third-party tool
In order not to make you feel regretful later, here I will introduce you another fix to get rid of the iPad volume button stuck trouble. That is employing iOS system repair applications such as TunesKit iOS System Repair. Compared with other methods, what make this one stands out is that this program can settle the problem with almost 100% working efficiency and won’t cause you any data loss on the iPad.
Spotlights of TunesKit iPad System Recovery
1. Solve all iOS system matters.
2. Supports other iOS devices like iPhone, iPod touch.
3. Supports all iOS versions.
4. With standard mode and advanced mode in hand.
5. Resolve problems with the fastest speed and highest success rate.
6. A simply understand interface and not complicated operations.
Let's go along the following steps to fix iPad volume button stuck.
Step 1: Choose repair mode. Firstly, launch TunesKit iPOS System Recovery for Mac on your computer. Then you need to connect your iPad with the computer. After the device has been detected, tap on the "Start" button. Next, choose the "Standard Mode". You have to select which device you've connected. Then follow the steps and put your device into DFU mode. After that, click on the "Next" button.
Step 2: Download iOS firmware package. Check if the related info of your iPad including the model version, iOS version, etc.is right, correct it if there's anything wrong. If all information is right, hit on the "Download" button and the firmware package matched with your device will be downloaded. Then verify the package quickly.
Step 3: Fix the iPad volume button stuck. When the firmware has been downloaded and verified successfully, you just press the "Repair" button and the program will automatically start to fix your iPad. Don't disconnect your device until the whole process is finished.
No comments:
Post a Comment